Here we have all the false ribs in place and I have installed 1/16 balsa shear webs. The webs are not called for on the plan but I thought it would be a good idea to add them.
The instructions call for drilling the holes in the LE for the alignment dowels after the wing is complete. I thought that was too imprecise so I made up a jig to drill them on the drill press.
Beginning of the wing tip construction.
A completed wing tip.
Tracing out the trailing edge scallops.
The finished product. Ready for sanding and fitting to the fuselage.
Back to the Albatros build page.
| Jeremy Harkin ©2004 | jeremy_harkin@yahoo.com |